As the title says, Phoenix Audio DRS-EQ/500 Microphone Pre-Amplifier/DI/Eq is now shipping. The concept units were presented at AES in NYC in October and at Winter NAMM in January.
Phoenix Audio DRS-EQ-500 Technical Specifications
# Class A (DSOP-2) Output specs. Frequency response: 20Hz to 20kHz +- 0.5dB
# Maximum Output Level: +26dBu @ 1kHz
# Noise: -90dB @ 20Hz to 20kHz.
# Phoenix Audio’s unique Class A, buffer DSblip stage.
# Input level range: -10dBu to +10dBu
# Self-contained on-board “boost” PSU.
# Gain Meter: LED Metering. (Green = -2dB, +4dbu & +10dbu Yellow = +13dB, Red = +16dbu.
# High Pass Filter: Roll-off starts at 80Hz @ 12dB per Octave.
# Gyratory-based EQ Frequency Centres: (4 Bands) High – 15K, 10K, Hi Mid – 6K, 3K, 1K6, Low Mid – 800Hz, 400Hz, 200Hz, Low – 130Hz, 80Hz, 40Hz
# EQ Cut/Boost Levels: 16dB Cut/Boost Per Band, all EQ bands are stepped/detented to 21 positions for easy recall & stereo operations for mastering or the mix bus.
# DRS-EQ/500 has an overall output level with 15db of additional gain even when the EQ is in bypass, allows the output fader to be used to drive the output stage & transformer to colour & saturate your sound, again even when the EQ is in bypass.
More details you can find directly on the official site of Phoenix Audio.
